2018 Mitsubishi Outlander 7-Inch Touch Screen Digitizer Replacement | OE 8741A001 / 8741A006

2018 Mitsubishi Outlander 7-Inch Touch Screen Digitizer Replacement

If the touchscreen in your 2018 Mitsubishi Outlander is cracked, scratched, shattered, worn, delaminating, or unresponsive, this replacement 7-inch digitizer restores factory-style touch control without replacing the entire radio or display. This is the correct repair when your LCD image still appears normally but the outer touch layer is damaged, letting you keep your original radio, LCD, trim, wiring, and vehicle programming.

Primary Vehicle Fitment

2018 Mitsubishi Outlander (ES, LE, SE, SEL, GT; 2.4L L4 or 3.0L V6 gas) and 2018 Outlander PHEV (SEL, GT; 2.0L L4 plug-in hybrid), fitted with the 7-inch factory touchscreen matching OE 8741A001 or 8741A006.

Possible Additional Fitment

May also fit nearby model years if the screen, OE number, ribbon cable, connector, and pin layout are identical: 2017 Outlander on select 7-inch systems only, and 2019 Outlander/PHEV if the display matches OE 8741A001/8741A006 with an identical layout. 2020-2022 Outlander is not recommended; later models may use 8-inch or 9-inch displays.

Do not order based only on year, make, and model. Compare your screen size, OE number, ribbon cable, connector, and pin layout before ordering.

OE / Interchange Reference Numbers

OE/OEM Part Number: 8741A006  |  Replaces: 8741A001  |  Supplier Ref: 8741A001~420068203LKQ

Provided for fitment verification. This is a replacement digitizer for compatible display systems, not a complete OEM radio receiver or display assembly.

This Replacement Helps Fix

Touchscreen not responding (fully or in areas), cracked/shattered/scratched glass, ghost touching from a damaged digitizer, worn/peeling/delaminated surface, or a screen that displays normally but no longer responds to touch.

This Part Will Not Fix

A blank or black screen, no power, backlight failure, LCD lines/bleeding/discoloration/dead pixels, Bluetooth/CarPlay/Android Auto/radio/amp/nav issues, or wiring, fuse, battery, board, or head-unit failures. If the image itself is missing, distorted, dark, or damaged, the LCD needs separate diagnosis.

Why Buy From Cuescreens?

Targets the actual failure point (the digitizer, not the whole radio) for major savings over a complete OEM display system, restoring clean touch response while keeping your original electronics. Backed by a 2-year warranty with lifetime upgrade and U.S.-based support.

What's Included / Not Included

Included: One 7-inch digitizer, protective packaging, Cuescreens support before and after purchase.
Not included: LCD display, radio receiver, complete display assembly, housing, control board, trim bezel, installation tools, or adhesive remover unless shown in photos or bundled.

Installation Notes

Professional installation is recommended. The factory display assembly must be removed and carefully disassembled. Compare the new digitizer with your original screen, confirming size, ribbon cable, connector, and pin layout before installing. Don't force the connector; contact us with photos first if anything doesn't match.

Warranty

Includes a 2-year warranty against qualifying defects, upgradable to lifetime coverage. Doesn't cover installation or physical damage, incorrect fitment, improper handling, vehicle electrical issues, head-unit failure, or forcing a connector or ribbon cable.

Frequently Asked Questions

Is this the complete radio receiver, and is programming required?

No, this is the digitizer only, letting you reuse your original radio, LCD, trim, wiring, and electronics. No programming is normally required.

Can I install this myself, and what should I check first?

Experienced DIYers may be able to, but professional installation is recommended since the display assembly must be carefully disassembled. Compare the digitizer with your original screen before removing protective film, confirm screen size, ribbon location, connector type, and pin layout, and contact us first if anything's off.