7" Touch Screen Digitizer Replacement for 2015–2016 Mazda CX-5 | KA5F-611J0A

Restore touchscreen control in your Mazda CX-5 without replacing the entire radio or infotainment display.

This Cuescreens 7" touch screen digitizer is designed for select 2015–2016 Mazda CX-5 factory radio information displays using the KA5F-611J0A style 10-pin touch panel. If your original touchscreen is cracked, scratched, faded, dented, shattered, or no longer responding to touch, this replacement digitizer allows you to replace the failed touch panel while keeping your existing LCD display and factory radio system.

Dealerships often recommend replacing the entire display or radio assembly when only the outer touch panel has failed. In many cases, the LCD and radio still work properly, and only the touchscreen digitizer needs to be replaced.

This part is the touchscreen glass/digitizer only. It does not include the LCD display.

Key Benefits

• Restores touchscreen response on compatible Mazda CX-5 factory radio displays
• Replaces cracked, scratched, faded, dented, or shattered touch glass
• Helps correct no-touch, dead-zone, or inconsistent touch response issues when caused by digitizer failure
• Designed for select 2015–2016 Mazda CX-5 7" radio information displays
• KA5F-611J0A style replacement touch panel
• 10-pin ribbon cable interface
• Factory-new replacement part
• Glass resistive touch screen construction
• No dealer programming required
• Keeps your existing LCD display and factory radio system
• Cost-effective alternative to replacing the full radio or display assembly
• Backed by Cuescreens support and warranty options
• Professional installation available through our nationwide installer network

Compatible Vehicles and Systems

Designed for select:

• 2015 Mazda CX-5 with compatible 7" factory radio information display
• 2016 Mazda CX-5 with compatible 7" factory radio information display

Compatible replacement part number:

• KA5F-611J0A

This part is intended for the 7" Mazda CX-5 display style that uses the matching 10-pin touchscreen ribbon connector.

Very Important Fitment Note

Please do not order by year alone.

Mazda used more than one 7" screen style across the 2015–2018 CX-5 range, and 2016 can be an overlap year depending on the radio/display installed in the vehicle. Before ordering, compare your original screen, part number, ribbon cable, and connector style to the product photos.

Order this listing only if your original unit matches the KA5F-611J0A style 7" touchscreen digitizer with the 10-pin connector.

If your 2016–2018 Mazda CX-5 uses the KAOH669GO / KA0H-style Mazda Connect digitizer, please order our separate 2016–2018 Mazda CX-5 7" touchscreen replacement instead.

If the connector does not match, this part will not install correctly.

What Issues Will This Product Fix?

This replacement touchscreen digitizer is designed to fix issues caused by a failed or damaged touch panel, including:

• No touch response
• Touchscreen dead spots
• Erratic or inaccurate touch response
• Cracked touch glass
• Shattered touch screen
• Scratched or worn touch surface
• Dented or physically damaged touch panel
• Faded or worn screen surface
• Touch layer failure while the LCD image still displays normally

What This Product Will Not Fix

This is a touchscreen digitizer only. It will not fix problems unrelated to the touch panel, including:

• Blank LCD display
• No image on the screen
• Lines, bleeding, or black spots inside the LCD
• Backlight failure
• Radio rebooting or software issues
• Bluetooth, Wi-Fi, audio, or CarPlay issues
• Backup camera signal problems
• Control knob or button issues
• Damage to the radio/head unit itself

If your screen image is missing, distorted, or damaged underneath the glass, you may need an LCD or complete display repair instead of only the digitizer.

Product Specifications

• Product Type: Touch screen digitizer / touch panel
• Vehicle Fitment: Select 2015–2016 Mazda CX-5
• Display Size: 7"
• Compatible Part Number: KA5F-611J0A
• Interface: 10-pin ribbon connector
• Touch Type: Resistive touch screen
• Main Material: Glass
• Thickness: Approximately 1.5mm
• Working Voltage: 5V
• Special Feature: Supports Can-Bus system compatibility where applicable
• LCD Included: No
• Programming Required: No

What’s Included

• 1 × 7" touch screen digitizer

LCD display, tools, and installation instructions are not included.

Free Ground Shipping

We offer free standard ground shipping on all orders over $75 USD within the continental United States. 

Processing & Delivery Times

• Orders are processed within 1-2 business days (Monday–Friday, excluding holidays).
• Standard ground shipping typically takes 3-7 business days after the order has been processed.
• Orders placed after 2:00 PM EST will be processed the following business day.

Find out more

At Cuescreens, we stand behind the quality of our products. Every purchase comes with a standard 2-year warranty, giving you confidence and peace of mind. Upgrade to our Lifetime Warranty for long-term coverage and worry-free ownership.

Learn more

Our screens can be self installed, and we'll guide you through step by step

How to install

Or if you would prefer a professional to install it for you, you can find them using this search.