Chevy GMC 8" MyLink/IntelliLink LCD + Touchscreen Replacement – DJ080PA-01A | Upgraded Chip- Plug and Play

The most requested product of 2025 is finally here.  Premium plug and play LCD + touchscreen replacement for Chevy and GMC 8" MyLink/IntelliLink systems based on the proven DJ080PA-01A platform. Pre bonded LCD and digitizer, upgraded QuantumCore chip, gel free design, and full support from CueScreens.

What is the best replacement screen for your Chevy or GMC 8" MyLink/IntelliLink radio?

If your Silverado, Sierra, Tahoe, Yukon, Suburban, Colorado, Canyon, or Acadia has a cracked display, ghost touches, lines in the image, or a dark or washed out screen, this plug and play LCD + touchscreen from CueScreens is built to be the best way to fix it.

Instead of scraping off old adhesive and separating the factory digitizer from the LCD, this part arrives as a fully pre bonded LCD + digitizer assembly with our highest level QuantumCore chip. You remove the old screen, plug this one in, and restore your infotainment system in a single step.

Why this QuantumCore LCD + digitizer is different

This is not a generic knockoff with no support. It is a premium replacement built on our best selling DJ080PA-01A platform and engineered for long term reliability.

Key advantages:

• True plug and play design
  LCD and digitizer are pre bonded at the factory. There is no need to peel, scrape, or clean off the old gel adhesive. You simply move your brackets and install the new assembly.

• QuantumCore performance chip
  Our top tier QuantumCore chip is designed for faster touch processing and stable communication with GM’s MyLink/IntelliLink systems. The result is quicker response, smoother swipes, and consistent performance in hot and cold climates.

• Gel free, upgraded construction
  The original design tends to separate and create bubbles or ghost touches as the adhesive fails. This upgraded design uses a gel free construction that eliminates the sticky mess and the failure mode that caused the screen to fail in the first place.

• OEM grade fit and finish
  Built to match the original 8 inch MyLink/IntelliLink display size and connector layout. The bezel and radio stay in place. Only the screen assembly is replaced.

• Backed by CueScreens
  Every screen is tested, backed by our standard 2 year warranty with a Lifetime Warranty upgrade option, and supported by a dedicated installation support team plus a nationwide installer network.

Fixes both display and touch problems in one part

Because this is a complete LCD + digitizer assembly, it can fix both image and touch issues at the same time.

This upgraded screen can resolve:

• Frozen, unresponsive, or misaligned touch

• Random or erratic inputs and ghost touches

• Cracked, shattered, or scratched touch glass

• Vertical or horizontal lines in the image

• Dark spots, flickering, or washed out colors

• Bubbles or “wet” spots from failing adhesive

If you currently only replace the digitizer and your LCD is starting to show image problems, this plug and play version eliminates repeat repairs and saves time.

Compatible vehicles and systems

Designed for GM vehicles equipped with 8 inch MyLink or IntelliLink infotainment systems that use the DJ080PA-01A style display.

Common applications include:

• Chevrolet Silverado

• Chevrolet Tahoe

• Chevrolet Suburban

• Chevrolet Colorado

• GMC Sierra

• GMC Yukon

• GMC Yukon XL

• GMC Canyon

• GMC Acadia

(Always compare your factory screen and part number before ordering.)

Compatible LCD part numbers:

• DJ080PA-01A

• DJ080EA-01K

If your factory screen or service documentation lists one of these part numbers and your vehicle has the 8 inch MyLink or IntelliLink radio, this replacement is designed for that system.

DIY friendly with pro support if you want it

You can install this LCD + digitizer yourself using basic tools and our step by step video instructions. Because the LCD and touchscreen are already bonded together, the install is simpler than traditional digitizer only repairs that require cleaning adhesive off the old LCD.

If you prefer professional installation, we also work with a nationwide network of over 2,000 installers who can handle the job for you. You get the same premium CueScreens part at a fraction of dealership pricing.

Save thousands compared to dealer replacement

Dealers typically replace the entire radio for issues that are caused only by the screen. Those repairs can run into the thousands once parts, programming, and labor are included.

With this QuantumCore LCD + touchscreen assembly you:

• Keep your original radio

• Replace only the failed screen

• Avoid expensive dealer programming fees

• Get an upgraded design that is built to last

Why choose CueScreens for your Chevy and GMC MyLink screen

CueScreens is focused on one thing. High quality automotive touchscreen replacement. You get:

• Premium gel free LCD + digitizer assemblies

• Engineering focused on long term reliability

• A standard 2 year warranty with Lifetime upgrade option

• Friendly, knowledgeable support that understands these systems

• A nationwide installer network if you do not want to DIY

Restore your Chevy or GMC 8 inch MyLink/IntelliLink screen once, do it right, and enjoy a factory fresh experience again with QuantumCore powered performance.

• QuantumCore upgraded chip for faster, smoother touch response

• Plug and play pre bonded LCD + touchscreen assembly

• Fixes cracked glass, ghost touches, lines, and image issues

• Gel free design eliminates the sticky factory adhesive mess

• OEM grade fit for 8" Chevy and GMC MyLink/IntelliLink systems

• Backed by a 2 year warranty with Lifetime upgrade option

• DIY friendly or nationwide installer network

Q: What is the best replacement screen for my Chevy or GMC 8 inch MyLink/IntelliLink system?
A: For vehicles that use the DJ080PA-01A style display, this QuantumCore LCD + touchscreen assembly is built as a complete plug and play replacement. It replaces both the LCD and digitizer in one part, uses our highest level chip, and is backed by CueScreens support and warranty.

Q: Do I need to separate the old digitizer from the LCD or scrape off adhesive?
A: No. The LCD and touchscreen are pre bonded at the factory. You remove the original screen assembly, move over any brackets as needed, and install this new assembly without dealing with the sticky gel from the original unit.

Q: Will this work if I already replaced the digitizer once?
A: Yes. If your previous digitizer only repair did not fix the image or if the LCD has now developed lines or dark spots, this complete LCD + digitizer assembly can replace both layers at the same time.

Q: Do I have to reprogram my radio after installing this screen?
A: In normal cases no additional programming is required. The QuantumCore screen is designed to communicate with your existing 8 inch MyLink or IntelliLink system. You reconnect the ribbon cables firmly, reassemble, and the radio recognizes the new screen.

Q: What if I do not feel comfortable installing it myself?
A: You can still order this screen and have a professional install it. Use our installer locator to find a trusted shop near you that is familiar with CueScreens products.