Is the Toyota RAV4 Touchscreen the Same Part as the Toyota Camry Touchscreen?

Short answer: sometimes, but not automatically. Toyota built the RAV4 and Camry on the same two touchscreen platforms, a 6.1 inch system and a 7 inch system, and both were supplied by Fujitsu Ten. That means the RAV4 and Camry can share the exact same digitizer part number. But "same model lineup" does not mean "same part for every year." The RAV4 and Camry were not always updated on identical schedules, so the correct replacement depends on your screen size and your specific model year, not just the fact that both vehicles say Toyota on the badge.

Why RAV4 and Camry Touchscreens Look So Similar

If you have ever compared a RAV4 dash to a Camry dash from the same era, the infotainment screen probably looked nearly identical. That is not a coincidence. Toyota sourced touchscreen assemblies from Fujitsu Ten across multiple model lines during this generation, and the RAV4, Camry, Corolla, and Prius C all pulled from the same small set of screen sizes and connector types. When two vehicles share a supplier and a screen size, the touch digitizer, the actual glass layer that reads your finger, can genuinely be interchangeable.

This is exactly why a single replacement part can legitimately cover several vehicles. It is not a compatibility trick. It reflects how Toyota actually built these systems.

Where the Two Vehicles Diverge: Year Ranges

Here is where owners get tripped up. Sharing a screen size does not mean sharing a year range. The RAV4 and Camry were refreshed on different timelines, so the compatibility window shifts depending on which vehicle you own.

7 Inch Touchscreen Systems

The 7 inch Fujitsu Ten touchscreen fits the 2014 to 2018 Toyota RAV4 and the 2015 to 2017 Toyota Camry. Notice that the RAV4 window is a full year longer on each end. A 2018 RAV4 owner and a 2017 Camry owner can use the same part number, but a 2018 Camry owner cannot, because that model year fell outside the shared window on the Camry side.

6.1 Inch Touchscreen Systems

The 6.1 inch digitizer fits the 2014 to 2016 Toyota RAV4, Prius C, Corolla, and Camry, all equipped with the basic Fujitsu Ten audio system. But even here, there is a carve-out: early 2014 Camry models are not covered, despite falling inside the stated year range. Toyota changed suppliers or hardware mid-cycle in some cases, which is exactly the kind of detail that gets missed when someone assumes "same brand, same year, same part."

Two Different Part Numbers, Two Different Screens

Because of the size difference, there are two separate compatible part numbers depending on which system your vehicle has, not one universal RAV4-Camry part:

• 7 inch systems: OEM reference C070VTN01, covering 2014 to 2018 RAV4 and 2015 to 2017 Camry
• 6.1 inch systems: OEM reference LA061WQ1 (TD)(04), with additional cross-reference numbers LA061WQ1 (TD)(01), 86100-02020, 86100-02100, and 86140-02470, covering 2014 to 2016 RAV4, Prius C, Corolla, and Camry (excluding early 2014 Camry units)

If your RAV4 has a 7 inch screen and your neighbor's Camry has a 6.1 inch screen, you are not shopping for the same product at all, even though both cars are Toyotas from a similar era.

How to Confirm Which Part Your Vehicle Actually Needs

1. Measure the screen diagonally. The 6.1 inch and 7 inch systems look similar at a glance but are not interchangeable with each other.
2. Confirm your radio was built by Fujitsu Ten. Toyota used more than one supplier across these model years, so not every RAV4 or Camry in the stated range has the same underlying hardware.
3. Check your model year against the specific compatible range for your screen size, not just the general RAV4 or Camry generation.
4. Compare your current screen and button layout to reference photos before ordering, especially if your vehicle falls near the edge of a compatible year range.

Why This Is a Digitizer, Not a Full Screen Replacement

Whether you have the 6.1 inch or 7 inch version, this is a digitizer-only replacement. The touch layer is what fails, ghost touches, unresponsive areas, cracked or worn glass, while the LCD display underneath keeps working. Dealerships often quote a full head unit swap for this problem, which can run well past a thousand dollars. Replacing only the failed touch layer restores full functionality while keeping your original display and factory system intact, at a fraction of dealer pricing.

This is not a quick five-minute fix. Expect to spend time carefully separating the digitizer from the LCD and reinstalling the new touch layer, work that most DIY customers complete using basic tools and Cuescreens' step-by-step video guides. If you would rather not do it yourself, Cuescreens also works with a nationwide network of installers.

Shop the Correct Toyota Touchscreen for Your Vehicle

Guessing on part numbers leads to returns and wasted time. Cuescreens builds vehicle-specific replacement digitizers so you order the right one the first time.

• Toyota 7" Touchscreen Digitizer Replacement for 2014 to 2018 RAV4 and 2015 to 2017 Camry, $99.00
• Toyota 6.1" Touchscreen Digitizer Replacement for 2014 to 2016 RAV4, Prius C, Corolla, and Camry, $99.00

Both digitizers include a standard 2-year warranty, with a Lifetime Warranty upgrade available for $25. Every order ships free within the continental United States on orders over $75, and Cuescreens has served over 100,000 customers with vehicle-specific, tested replacement parts. Still not sure which one fits your car? Reach out to our support team before you order and we will help you confirm the correct screen.

Frequently Asked Questions

Is the RAV4 touchscreen the same part as the Camry touchscreen?

Sometimes. Both vehicles share the same two screen sizes and the same supplier, Fujitsu Ten, so the digitizer can be identical. But the compatible year range differs between the two models, so you always need to confirm year and screen size together, not just the model name.

What years overlap between the RAV4 and Camry for the 7 inch screen?

2014 to 2018 for the RAV4 and 2015 to 2017 for the Camry. The RAV4 range runs a year longer on each side.

What years overlap between the RAV4 and Camry for the 6.1 inch screen?

2014 to 2016 for both, along with the Prius C and Corolla, but early 2014 Camry models are excluded from this compatibility.

Does replacing the touchscreen replace the whole screen assembly?

No. This replaces the digitizer, the touch-sensing glass layer, only. Your original LCD display stays in place, which is why this repair costs far less than a full head unit replacement.

How do I know which screen size and part I actually need?

Measure your screen diagonally, confirm your radio was built by Fujitsu Ten, and match your exact model year against the compatible range for that screen size before ordering.

About the Author: Daniel Gigante has over 18 years of experience in the automotive industry, with a focus on vehicle technology, infotainment systems, and real-world reliability. He writes about automotive design, touchscreen usability, and how modern technology impacts everyday driving.