A Harley-Davidson Boom! Box GTS touchscreen repair can cost anywhere from around $200 for a digitizer-only replacement to well over $2,000 for a full radio replacement, depending on which component has actually failed. Here is how the two repair paths compare, using sourced pricing rather than guesswork.
The Two Repair Paths
When a Boom! Box GTS touchscreen starts ghost touching, cracking, bubbling, or not responding, riders are generally presented with two very different repair paths: replacing the entire radio unit, or replacing just the touchscreen digitizer that sits on top of it.
These two repairs are not interchangeable in cost, because they are not replacing the same amount of hardware. A full radio replacement swaps out the LCD, the digitizer, the processor, the GPS module, and the Bluetooth hardware all at once. A digitizer-only replacement targets just the outer touch-sensitive glass layer, while keeping the original radio, LCD, programming, and vehicle integration in place.
What a Digitizer-Only Replacement Costs
The Cuescreens Harley-Davidson Boom! Box GTS 6.5 inch touchscreen digitizer replacement is priced at $199.00, with an optional Lifetime Warranty upgrade available for an additional $25. This is intended for 2019 to 2023 Boom! Box GTS radios associated with part numbers 76000783, P76000783, and P76000783B, and does not require radio programming since the original radio and LCD stay in place.
What a Full Radio Replacement Costs
There is no single fixed price for a full Boom! Box GTS radio replacement, since it depends on parts availability, labor rates, and whether the work is done through a dealer. Rather than inventing a number, here is one concrete reference point: a genuine OEM Boom! Box GTS radio head unit for a CVO application has been listed by a third-party parts seller as normally retailing above $2,020 for the part alone, before labor or installation is factored in.
That figure reflects the parts cost on one specific application, not a universal dealer quote, and actual pricing will vary by model, trim, and whether the radio is sourced new, used, or through a dealer. What is consistent across sources is the general shape of the cost gap: a full radio swap involves replacing hardware that, in most touchscreen failure cases, was never actually broken.
Why the Cost Gap Is So Large
The touchscreen digitizer, the LCD, and the radio electronics are three separate components bonded together in the same housing. In the majority of reported Boom! Box GTS failures, the touch layer is the part that fails first, typically showing up as ghost touches, delamination, bubbling under the screen, scratches, cracked outer glass, or delayed and inconsistent touch response, while the radio still powers on and the display image remains visible.
A full radio replacement addresses that failure by replacing every component at once, including the ones that were never broken. A digitizer-only replacement addresses only the layer that actually failed.
How to Tell Which Repair You Need
If your Boom! Box GTS radio still powers on and the display image is visible, but the touch screen is cracked, bubbling, delaminating, scratched, ghost touching, or no longer responding correctly, a digitizer-only replacement is typically the correct repair path.
If the LCD image itself is distorted, black, flickering, showing lines, or missing entirely, the touch layer is likely not the only failed component, and further diagnosis is needed before ordering a digitizer replacement.
It is also worth confirming which radio is actually in your fairing before ordering either repair path. The Boom! Box GTS and the older 6.5GT share the same 6.5 inch screen size, but the two systems are not interchangeable. See 6.5GT vs. Boom! Box GTS: Why Your Harley-Davidson Touchscreen Replacement Has to Match the Right Radio for how to tell them apart before you order.
Frequently Asked Questions
How much does a Cuescreens Boom! Box GTS digitizer replacement cost?
The Cuescreens Harley-Davidson Boom! Box GTS 6.5 inch touchscreen digitizer replacement is priced at $199.00, with an optional Lifetime Warranty upgrade for an additional $25.
How much does a full Boom! Box GTS radio replacement cost?
There is no single fixed price, since it depends on parts availability, labor rates, and whether the repair is done through a dealer. As one reference point, a genuine OEM Boom! Box GTS radio head unit for a CVO application has been listed by a third-party parts seller as normally retailing above $2,020 for the part alone, before labor or installation.
Do I need a full radio replacement or just a digitizer?
If your radio still powers on and the display image is visible, but the touch screen is cracked, bubbling, delaminating, scratched, ghost touching, or unresponsive, a digitizer-only replacement is typically the correct repair. If the LCD image itself is distorted, black, flickering, showing lines, or missing entirely, the touch layer is likely not the only failed component and further diagnosis is needed.
Does replacing the digitizer require radio programming?
No radio programming is required when replacing the digitizer on your original Boom! Box GTS radio, since the original radio, LCD, programming, and settings all remain in place.
About the Author: Daniel Gigante has over 18 years of experience in the automotive industry, with a focus on vehicle technology, infotainment systems, and real-world reliability. He writes about automotive design, touchscreen usability, and how modern technology impacts everyday driving.
![[Premium] Upgraded Gel-Free Cadillac CUE Replacement Touch Screen Display-Cuescreens](http://www.cuescreens.com/cdn/shop/files/7c1892_b5fcaf040dfe42abb289e47b1fa91ab9_mv2.png?v=1738265347&width=460)
![[Premium] Upgraded Gel-Free Cadillac CUE Replacement Touch Screen Display-Cuescreens. Supports Proximity Sensors.](http://www.cuescreens.com/cdn/shop/files/7c1892_7faa9297eab444d5a99838357b9c178c_mv2.png?v=1764720901&width=460)
